Alpine DVA-9861Ri Bedienungsanleitung PDF herunterladen (Seite 40)

39-EN

01GB05DVA9861Ri.fm

ALPINE DVA-9861Ri 68-04123Z62-A (EN)

Select the desired channel by pressing or ,

then press MODE.

When L+R is selected :

FRONT 1 FRONT 2 REAR CENTER

SUBWOOFER FRONT 1

When L/R is selected :

FRONT 1L FRONT 1R FRONT 2L FRONT 2R

REAR L REAR R CENTER SUBWOOFER

FRONT 1L

• The speakers display differs, depending on the connected speakers.

Adjust the calculated time correction value (0.00 to

20.00ms) by turning the Rotary encoder, then

press MODE.

Switch the phase (PHASE 0° or 180°) by turning the

Rotary encoder, then press MODE.

To adjust other channels, repeat steps 8 to 10.

When the setting is complete, press and hold TA for

at least 2 seconds.

The unit returns to the normal mode.

• When the speaker is set to the “OFF” mode, the TCR for that

speaker cannot be set. Refer to “Setting the Speakers” (page 37).

• The adjustment value for FRONT2 (Speakers) which is adjusted in

time correction, is also applied to the front speakers in “Setting Bass

Focus” (page 41).

• The adjustment (AUTO TCR) cannot be automatically set on this

unit.

• When the setting is complete, it is recommended to store the setting

contents. For storing, refer to page 44.

Graphic Equalizer Adjustments

The graphic equalizer allows you to modify the sound using 31 bands

each for the front (left and right), rear (left and right) and centre

speakers. An additional 10 bands are available for the subwoofer. This

allows you to customize the sound to suit your taste.

Check that Defeat mode is off (page 25).

Press and hold TA for at least 2 seconds.

The audio processor control mode is activated.

Select the G-EQ mode by pressing TA repeatedly.

Select L+R or L/R by pressing and holding BAND for

at least 2 seconds.

When parametric EQ is adjusted, this setting will be turned

off.

Select the desired channel by pressing or ,

then press MODE.

When L+R is selected :

FRONT REAR CENTER SUBWOOFER FRONT

When L/R is selected :

FRONT L FRONT R REAR L REAR R CENTER

SUBWOOFER FRONT L

• The speakers display differs, depending on the connected speakers.

Select the frequency by turning the Rotary

encoder, then press MODE.

Adjust the level (LEVEL) (±9dB 1dB step) by turning

the Rotary encoder, then press MODE.

To adjust other frequencies, repeat steps 6 and 7.

To adjust other channels, repeat steps 5 to 8.

When the setting is complete, press and hold TA for

at least 2 seconds.

The unit returns to the normal mode.

• When the speaker is set to the “OFF” mode, the level of the graphic

equalizer for that speaker cannot be adjusted. Refer to “Setting the

Speakers” (page 37).

• Check the playable frequency ranges of the connected speakers

before making the equalizer adjustments. If the speaker’s playable

frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz

or 20 Hz band has no effect. Additionally, you may overload and

damage the speakers.

• When graphic EQ is adjusted, the adjustment for parametric EQ

becomes ineffective.

• When the setting is complete, it is recommended to store the setting

contents. For storing, refer to page 44.

Switching the Phase

L+R: Sets the same adjustment values for the left and right

channels.

L/R: Different adjustment values can be set for the left and

right channels.

Adjustable frequency:

FRONT/REAR/CENTER: 20Hz - 20kHz (in 1/3 octave steps)

SUBWOOFER: 20Hz - 160Hz (in 1/3 octave

steps)

01GB00DVA9861Ri.book Page 39 Wednesday, December 7, 2005 12:00 PM

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Alpine DVA-9861Ri Bedienungsanleitung Seite 40

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger und Verstärker Alpine DVA-9861Ri