Alpine CDE-171R Bedienungshandbuch PDF herunterladen (Seite 16)

16-EN

Setting the Mid Control

After selecting MID from the 3BAND EQ adjustment mode,

turn the Rotary encoder to select the desired Mediant

setting item, and then press ENTER.

WIDTH (Q)  CENTER FRQ  LEVEL

Turn the Rotary encoder to select the desired setting

value, and then press ENTER.

Press r to return to the previous step.

 Setting the Mid Bandwidth (WIDTH (Q))

Turn the Rotary encoder to select the desired Mid

bandwidth.

WIDE 0.75  MEDIUM 1.00  MEDIUM 1.25  NARROW 1.50

 Setting the Mid Centre Frequency (CENTER FRQ)

Turn the Rotary encoder to select the desired Mid centre

frequency.

500 (Hz)  1.0k (Hz)  1.5k (Hz)  2.5k (Hz)

 Setting the Mid Level

Turn the Rotary encoder to select the desired Mid level (-7

~ +7)

You can emphasise or weaken the Mid level.

* The adjustment can also be made by pressing AUDIO. Refer to

“Adjusting Subwoofer Level/Bass Level/Middle Level/Treble Level/

Balance (Between Left and Right)/Fader (Between Front and

Rear)/Loudness/Defeat” on page 14.

Setting the Treble Control

After selecting TREBLE from the 3BAND EQ adjustment

mode, turn the Rotary encoder to select the desired

Treble setting item, and then press ENTER.

WIDTH (Q)  CENTER FRQ  LEVEL

Turn the Rotary encoder to select the desired setting

value, and then press ENTER.

Press r to return to the previous step.

 Setting the Treble Bandwidth (WIDTH (Q))

Turn the Rotary encoder to select the desired treble

bandwidth.

WIDE 0.75  NARROW 1.25

 Setting the Treble Centre Frequency (CENTER FRQ)

Turn the Rotary encoder to select the desired treble

centre frequency.

7.5K (Hz)  10.0K (Hz)  12.5K (Hz)  15.0K (Hz)

 Setting the Treble Level

Turn the Rotary encoder to select the desired treble level

(-7~+7)

You can emphasise or weaken the treble level.

* The adjustment can also be made by pressing AUDIO. Refer to

“Adjusting Subwoofer Level/Bass Level/Middle Level/Treble Level/

Balance (Between Left and Right)/Fader (Between Front and

Rear)/Loudness/Defeat” on page 14.

The output level of each source is individually adjustable. For example, if

the TUNER level sounds lower than CD, its output can be adjusted

without affecting the other sources.

 Setting item: VOL LV ADJ

 Further setting items: TUNER / DISC / USB / iPod

/ AUX

Setting contents:

-14dB ~ +14dB

* CDE-171R/CDE-171RR/CDE-171RM only.

The High Pass Filter on this unit can be adjusted to suit your personal

taste.

 Setting item: HPF

Setting contents:

OFF (Initial setting) / 60 (Hz) / 80 (Hz) / 120 (Hz) / 160 (Hz)

All frequencies above the selected cutoff are output.

When the subwoofer is on, you can adjust the subwoofer output level

(refer to “Adjusting Subwoofer Level/Bass Level/Middle Level/Treble

Level/Balance (Between Left and Right)/Fader (Between Front and

Rear)/Loudness/Defeat” on page 14).

 Setting item: SUBWOOFER

Setting contents:

OFF / ON (Initial setting)

OFF:

No subwoofer signal is output from the Subwoofer RCA

Connectors (refer to “Connections” on page 31).

ON:

The subwoofer signal is output from the Subwoofer RCA

Connectors (refer to “Connections” on page 31).

The Low Pass Filter on this unit can be adjusted to suit your personal

taste.

 Setting item: SUBW LPF

Setting contents:

OFF (Initial setting) / 60 (Hz) / 80 (Hz) / 120 (Hz) / 160 (Hz)

All frequencies lower than the selected cutoff are output.

The subwoofer output phase is toggled SUBWOOFER NORMAL (0°) or

SUBWOOFER REVERSE (180°). To adjust the level, turn the Rotary

encoder.

 Setting item: SUBW PHASE

Setting contents:

NORMAL (Initial setting) / REVERSE

Setting the Source Volume Level

Adjusting the High Pass Filter

Turning Subwoofer ON/OFF

Adjusting the Low Pass Filter

Setting the Subwoofer Phase

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Alpine CDE-171R Bedienungshandbuch Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger Alpine CDE-171R