Alpine CDE-140 Bedienungshandbuch PDF herunterladen (Seite 38)

38-EN

2 Input the new passcode as steps 1 to 4 in “How to input

passcode?”.

A confirm screen (CONFIRM) will be displayed and the new

passcode must be entered again for confirmation.

When the passcode is changed successfully, the unit will

display CODE SAVED.

Note

• Keep a note of the numbers somewhere safe in case you should

forget it.

You can check the signal strength through this setting item.

 Setting item: SIGNAL IND

Setting content:

SIGNAL IND

SIGNAL IND:

This menu item displays the SiriusXM signal strength as STRONG,

GOOD, WEAK or NO SIGNAL.

Note

• If the Signal Indicator reports Weak or No Signal and your vehicle is

parked outside with no obstructions to the southern sky, then your

SiriusXM antenna may not be properly installed or may have become

damaged.

Tuning to a Preset that is a music channel will start a song from the

beginning.

 Setting item: TUNE START

Setting contents:

OFF / ON (Initial setting)

OFF:

When set to OFF, Tune Start mode is unavailable.

ON:

When ON, selecting a preset station will automatically reset the

currently playing song from its beginning. Pressing r will return

to live satellite radio.

Note

• Displayed only when SiriusXM Tuner-SXV200 is connected.

Checking the SiriusXM Radio ID Number

To subscribe to the SiriusXM Satellite Radio service, it is necessary to

locate and identify the Radio ID of your SiriusXM Tuner. The Radio ID

contains 8 characters and can be found on the bottom of your SiriusXM

Tuner or can be displayed on when selecting Channel 0 by following the

steps below:

While in the Satellite Radio Mode, press  or  to

select channel “0”.

The unit displays “RADIO ID” and ID number at the same time.

Note

• The Radio ID does not include the letters I, O, S or F.

To cancel the ID number display, select a channel other

than “0”.

Storing Channel Presets

Press BAND to select the desired band you want to store

the preset in.

There are 3 Satellite Radio Preset bands.

Each press of BAND changes the band: SXM1  SXM2  SXM3

 SXM1

Tune to the desired channel, and then press and hold (for

at least 2 seconds) one of the preset buttons (1 through 6)

to store the channel.

The display then shows the stored Band and preset number (for

example, SXM1-3 is shown when preset 3 of BAND1 is selected).

Repeat the procedure to store up to 5 other channels onto

the same band.

Notes

• A total of 18 channels can be stored in the preset memory, 6 Channels

for each band (SXM1, SXM2 and SXM3).

• If you store a new channel into a preset which already has a channel

assigned, the current channel will be cleared and replaced with the new

one.

Tuning Channels using Presets

Press BAND to select the desired band of Presets you wish

to access.

Press the preset buttons (1 through 6) that has your

desired Satellite Radio channel stored in memory.

Tune Scan Function

While listening to SiriusXM Satellite Radio, you can scan through all the

songs you missed from your current band of preset channels.

Press and hold /ENTER/OPTION for at least 2 seconds

when you want to scan the preset music.

The Option mode is activated.

Turn the Rotary encoder to select TUNE SCAN, and then

press /ENTER.

The “ ” indicator lights up during TUNE SCAN mode.

Press /ENTER during scan playback, tune scan mode will be

canceled and the selected track will be played back normally, at

the same time the “ ” indicator disappears.

Press r during scan playback to cancel Tune Scan mode. The

tuner returns to the channel before Tune Scan was initiated and

“SCAN STOP” will be displayed.

Notes

• This function is available when SiriusXM SXV200 Vehicle Tuner is

connected.

• If no operation is performed during the scanning process, when

scanning finishes, the next mode depends on the SiriusXM Tuner.

• The SiriusXM Tune scans through the songs from the preset music

channels on the current band only, scanning from oldest to newest.

Confirming the strength of the SiriusXM

signal

Setting Tune Start

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 105 106

Kommentare zu diesen Handbüchern

Keine Kommentare

Alpine CDE-140 Bedienungshandbuch Seite 38

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Medienempfänger Alpine CDE-140