Alpine CDE-140 Bedienungshandbuch PDF herunterladen (Seite 24)

24-EN

Setup Before Using

BLUETOOTH is a wireless technology allowing communication

between a mobile device or personal computer over short distances.

This enables a hands-free call or data transmission between

BLUETOOTH compatible devices. BLUETOOTH transmission is

available in the unlicensed 2.4 GHz spectrum if the distance between

devices is within 10 meters. For details, refer to the BLUETOOTH

Home page (http://www.bluetooth.com).

Notes

• Depending on the BLUETOOTH version, a BLUETOOTH compatible

device may not be able to communicate with this unit.

• Proper function of this unit with all BLUETOOTH compatible devices

is not guaranteed. For handling of the BT compatible device, consult

your ALPINE dealer or ALPINE website.

• Depending on the surroundings, BLUETOOTH wireless connection

may be unstable.

• When you place a call, or perform setup operations, be sure to stop your

car in a safe place.

• Depending on the connected BLUETOOTH compatible device(s), the

function may differ. Also refer to the Owner’s Manual of the connected

device(s).

• When you search for this unit using the BLUETOOTH compatible

phone, the unit name is displayed as “CDE-154Series”.

Before using the BLUETOOTH function, the following settings need to

be made.

Set BT IN to ON when you want to use Hands-Free phone

or BT Audio function. Refer to “Setting the BLUETOOTH

Connection (BT IN)” on page 25.

Note

• Before using BLUETOOTH function, it must be paired with this unit.

Refer to “How to connect to a BLUETOOTH compatible device

(Pairing)” on page 24.

For details on the control from a BLUETOOTH compatible device, refer

to the Owner’s Manual of the BLUETOOTH compatible device.

Using your BLUETOOTH compatible device, select the

“CDE-154Series” for pairing.

For BLUETOOTH compatible device with SSP

(Secure Simple Pairing)

2-1

Turn the Rotary encoder to change the head unit display

from “PAIR NO” to “PAIR YES”, and then press ENTER.

If “PAIR NO” is selected, the connection will be canceled.

For BLUETOOTH compatible device without SSP

(Secure Simple Pairing)

2-2

Input the PIN code (“0000”) in a BLUETOOTH compatible

device.

Note

• The PIN code is fixed as “0000”.

If the pairing was successful, “CONNECTED” is displayed

for a few seconds. The head unit then returns to its

previous state.

Auto pairing with an iPod/iPhone

When an iPod/iPhone is connected to the USB port, the unit will

automatically pair with it.

Make sure USB PAIR is set to ON. Refer to “Setting the Auto

Pairing with iPod/iPhone” on page 25.

Connect an iPod/iPhone to this unit’s USB port.

Turn the Rotary encoder to select “PAIR YES”, and then

press ENTER.*

If “PAIR NO” is selected, the connection will be canceled.

* Depending on the iOS version, you may need to turn on the

Bluetooth function manually on the iPod/iPhone side, then

perform this step.

If pairing is successful, “CONNECTED” is displayed for a

few seconds. The head unit then returns to its previous

state.

Notes

• If the device has been paired with this unit previously, it will not USB

Pair automatically.

• If the connection is unsuccessful, “FAILED” is displayed.

• After a successful pairing, the two devices should connect automatically

whenever the vehicle’s ignition is turned ON. If the auto reconnect fails,

try to connection manually.

• Set “VISIBLE M” to ON to enable this unit to be recognized by a

BLUETOOTH compatible device, refer to “Setting the Visible Mode” on

page 25.

BT Hands Free Calling

About BLUETOOTH

Before Using BLUETOOTH Function

/SOURCE

/ II

BAND

ABC SEARCH



AUDIO/SETUP





/ENTER

/VOICE CTRL.





Rotary encoder

Preset buttons

(1 through 6)

How to connect to a BLUETOOTH

compatible device (Pairing)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 105 106

Kommentare zu diesen Handbüchern

Keine Kommentare

Alpine CDE-140 Bedienungshandbuch Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Medienempfänger Alpine CDE-140