Alpine DVA-9860 Bedienungshandbuch PDF herunterladen (Seite 23)

22-EN

Erasing Disc Title

Press TITLE to select the Title Display. Then, press

again and hold for at least 2 seconds.

Press and hold -/J for at least 2 seconds.

The title in the display will blink.

Press g or f repeatedly until the title you

want to erase is displayed.

Press and hold -/J for at least 2 seconds to erase

the title displayed.

Press TITLE to cancel the title erasing mode.

•You cannot erase CD-TEXT.

• “NO DATA” is displayed for 2 seconds if the title is not input in

step 2, or if the title is erased in step 4.

Setting the Wallpaper

A data file downloaded from the ALPINE Owner’s website is written

to a CD-R/CD-RW disc, and automatically uploaded when the disc is

inserted into the DVA-9860R.

The wallpaper file can be saved and displayed as long as a disc is not

inserted, or while playing a CD/MP3/WMA audio, or if a DVD disc is

stopped.

• If several files are stored in a disc, only the first file will be stored

on the unit.

Insert a CD-R/CD-RW disc containing data.

After sensing the disc, the data file is updated.

• Up to 2 files can be stored on this unit. If a third file is

downloaded, the first file is overwritten and new one memorized.

•To change the wallpaper, press and hold ENT. on the remote

control unit for at least 2 seconds while disc is not inserted, or

while PRE-STOP or STOP is set in disc mode.

• Even if the battery power cable is removed, the downloaded data is

not cleared.

Titling Discs

It is possible to title your favourite CD’s.

You cannot input titles for data discs containing MP3/WMAs, DVD ,

Video CD discs or radio stations.

Press TITLE and select the Title Display.

For details, see “Displaying the Title/Text” (page 21).

Press and hold TITLE for at least 2 seconds. The

first character will blink.

Turn the Rotary encoder to select the desired

letter/numeral/symbol available for naming.

Press Rotary encoder to store the first character.

The first character will stop blinking and the display will

automatically advance to the next character. When that

character begins to blink, you may choose the next letter

or symbol of your title.

Repeat steps 3 and 4 above to complete the titling.

Pressing the Rotary encoder after entering the 8th

character automatically stores the title into memory.

When entering a title of less than 8 characters (for

example, 3 character title):

After entering 3 characters, the 4th character space will

be blinking. Go to step 6 to complete the title.

Press TITLE to record the title.

• If you cancel while entering a title, selected characters are not

written.

•You can enter 18 CD titles on this unit. If you try to store beyond

the limit, the display will show “FULL DATA.” At this point, no

more titles can be stored. To input a new title, one of the previously

inputted titles must first be deleted.

• The CD Changer title length or memory capacity varies depending

upon the model being used.

• When you want to erase a title, enter the “ ” symbol into all

spaces.

• The operations described in steps 3 to 5 must be made within 10

seconds. The input mode will be cancelled if no action is taken for

over 10 seconds.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Alpine DVA-9860 Bedienungshandbuch Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Videosysteme Alpine DVA-9860