Alpine DVA-9860 Bedienungshandbuch PDF herunterladen (Seite 37)

36-EN

Adjust the level (LEVEL) by turning and then

pressing the Rotary encoder.

The level can be adjusted within the range of –5 to +5.

The higher the level, the more the position of the centre

speaker is shifted to the sides.

When the setting is complete, press and hold

CENTER f. for at least 2 seconds.

The unit returns to the normal mode.

Press CENTER f. to select another item to be set.

• This adjustment is effective when the setting of the centre speaker

to SMALL or LARGE in the speaker setup settings.

• This adjustment is ineffective when the speaker is set to CENTER

OFF in “Setting the Speakers” (page 30).

• When the setting is complete, it is recommended to store the setting

contents. For storing, refer to page 37.

Achieving powerful high volume sound

With Dolby Digital, the dynamic range is compressed so that

powerful sound can be achieved at regular volume levels. This

compression can be cancelled to achieve an energetic sound with even

greater power, like the sound in a movie theatre.

This function works only in the Dolby Digital mode.

Check that Defeat mode is off (page 17).

Press and hold CENTER f. for at least 2 seconds.

The audio processor control mode is activated.

Select the 5.1CH SETUP mode by pressing

CENTER f. repeatedly.

Select LISTENING MODE by pressing g or f.

Select STANDARD or MAXIMUM by turning and

then pressing the Rotary encoder.

STANDARD: For powerful sound at regular volume levels

MAXIMUM: For powerful sound at high volumes

When the setting is complete, press and hold

CENTER f. for at least 2 seconds.

The unit returns to the normal mode.

Press CENTER f. to select another item to be set.

•Keep the volume to a level at which sounds outside the vehicle can

still be heard.

• When the setting is complete, it is recommended to store the setting

contents. For storing, refer to page 37.

Adjusting the DVD Level

The volume (signal level) for Dolby Digital, Dolby PL II, DTS and

PCM modes can be set.

•Avoid stopping, pausing, switching the disc, cueing, fast-

forwarding or switching the audio channel of this unit while

making this adjustment. The setting is cancelled if the Decode

mode is switched.

Check that Defeat mode is off (page 17).

Press and hold CENTER f. for at least 2 seconds.

The audio processor control mode is activated.

Select the DVD LEVEL mode by pressing

CENTER f. repeatedly.

Press the Rotary encoder to select the mode to

be adjusted.

DOLBY D → DOLBY PL II → DTS → PCM → DOLBY D

Adjust the level (LEVEL) by turning and then

pressing the Rotary encoder.

The level can be adjusted in the range of –5 to +5.

When the setting is complete, press and hold

CENTER f. for at least 2 seconds.

The unit returns to the normal mode.

Press CENTER f. to select another item to be set.

• When the setting is complete, it is recommended to store the setting

contents. For storing, refer to page 37.

Using the Pro Logic II Mode

Pro Logic processing can be conducted on the music signals recorded

on two channels to achieve Dolby Pro Logic II surround sound. For

two-channel Dolby Digital and DTS signals, there is also a “REAR

FILL” function for outputting the signals of the front channel to the

rear channel.

Check that Defeat mode is off (page 17).

Press and hold CENTER f. for at least 2 seconds.

The audio processor control mode is activated.

Select the DOLBY PL II mode by pressing

CENTER f. repeatedly.

Select the desired mode by pressing g or f.

MOVIE MODE:

Suits the stereo TV shows and all programs

encoded in Dolby Surround. It improves the sound

field directivity to near that of discrete 5.1-channel

sound.

MUSIC MODE:

Can be used for all stereo music recordings, and

provides a wide, deep sound field.

REAR FILL ON:

Depending on the input signals, the sound may only

be output from the front speakers. In this case, the

“REAR FILL” function can be used to output signals

from the rear speakers as well.

OFF: Turns DOLBY PL II function to OFF.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 177 178

Alpine DVA-9860 Bedienungshandbuch Seite 37

Kommentare zu diesen Handbüchern

Alpine DVA-9860 Bedienungshandbuch Seite 37

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Videosysteme Alpine DVA-9860